Coal Crushing Machine, Charcoal Crushing Machine
Ring Hammer Crushing Machine crushes the material by the hit between the rotating hammer at high speed and the material. It has simple structure, large reduction ratio and high production rate. It can crush the raw material by dry and wet two types. It is suitable for mine, cement, coal, metallurgy, building materials, road, burning and other departments to crush medium-hard materials and brittle materials. It can be also adjusted the discharging granularity to meet different requirements.
Application of Coal Crusher:
It is suitable for crushing brittle, medium-hard materials with the surface moisture content less than 15%-10% and compressive strength less than 100Mpa. It is widely used for secondary crushing materials in construction, metallurgy, chemical industry and thermal power generation and fine crushing materials, such as coal, coal gangue, coke, slag, limestone, sandstone, shale, gypsum and rock phosphate, etc.
Working Parts of Charcoal Crushing Machine:
The working part of ring hammer crushing machine is the rotor with hammer. The rotor consists of main shaft, disk, hinge pin and hammer.
Ring hammer crushing machine mainly consists of several parts: scaffold center, rotor center, grate center, synchronization regulation device, hydraulic-open device and other parts.
Features of Coal Crusher:
1.It has large crushing space and feeding hole, which suits for high hardness and large lumpiness materials.
2.The material hanging in the air can cost less consumption.
3.It has novel hammer and has large impact force.
4.The hammer shaft can be adjusted and has long working life.
5.The chassis can be turned and the particle size can be controlled.
Technical Parameters of Coal Crushing Machine:
|Model||Feeding Granularity(mm)||Discharging Granularity(mm)||Capacity(t/h)||Rotating Speed(r/min)||Electric Motor Power(kw)||Weight(t)||Dimension(mm)|